2024-01-30
Ⅰ.Five major reasons for forklift tire wear 1. Under a certain tire pressure, overloading the tire will increase its deflection and deformation, and increase the stress on the cords and cords, which can easily cause the cords in the sidewall to break, loosen, and delaminate the
CLICK MORE
2024-01-29
The universal transmission device of the forklift should be neither tight nor loose, the bolts should be fully tightened, the assembly angle should be correct, the lubrication should be good, and there should be no shaking or abnormal noise during driving. Therefore, when
CLICK MORE
2024-01-26
1. Preface The brakes used in engineering vehicle products mainly include: shoe brakes, wet multi-disc brakes, and caliper disc brakes. Most 1-10t forklifts produced by domestic enterprises use shoe brakes; forklifts and stackers above 16t use wet multi-disc brakes; loade
CLICK MORE
2024-01-17
With the development of society, forklifts have become an important tool in the logistics and warehousing industry. The charging process is an indispensable part of the forklift operation. Therefore, understanding the charging steps and precautions of the forklift is of great sig
CLICK MORE
2024-01-16
1. HELI "HELI" has become a well-known brand with independent intellectual property rights. In 2005, it was recognized as a "well-known protection" by the State Administration for Industry and Commerce; the "HELI" brand was awarded the "Export Famous
CLICK MORE
2024-01-15
Ⅰ. P series fault codes 1. E01 - There is pressure on the handle plate but not on the pedal plate, or there is no pressure on the handle plate but there is pressure on the pedal plate. Cause of failure: Poor circuit board connection or failure. &nb
CLICK MORE
2024-01-12
The width of forklift forks usually ranges from 900 mm to 1200 mm, and the specific size needs to be customized according to the usage and working scene.1. Why is the size of the fork important? The forklift fork is one of the core components of the forklift
CLICK MORE
2024-01-11
Xilin forklift instrument fault code analysisⅠ. Introduction to fault codes 1. E0007: The battery voltage is too high or too low. 2. E0102: Cab battery voltage is too high or too low. 3. E0201: The controller voltage i
CLICK MORE
LINKS:
Harber Metal
+86 022-88130099
+86 15522168843
info@toomotoo.com 
+86 022-88130099
+86 15522168843
info@toomotoo.com
