How to stall the forklift？

    Ⅰ. Various methods for forklift stalling

     When you need to shut down the forklift, you can take the following methods:

    1. Turn off the ignition switch: This is the most direct method. Turn the ignition switch to the "OFF" position to turn off the engine.

    2. Turn off the engine by powering off: If the forklift does not have an ignition switch, you can turn it off by unplugging the battery cable or the flameout switch cable.

    3. Unplug the fuel pipe: For fuel forklifts, you can cut off the fuel supply and stall the engine by unplugging the fuel pipe.

    4. Squeeze the valve: This is the most common method. You can stop the engine by depressing the brake, depressing the accelerator to the bottom, and pressing the valve at the same time.

     5. Unplug the relay: Some electric forklifts can be turned off by unplugging the relay.

Ⅱ.Precautions

    When shutting down the forklift, you need to pay attention to the following points:

    1. To ensure your safety, please park the forklift before shutting it down.

    2. When turning off the engine by unplugging the fuel pipe, be careful not to get the paint on the vehicle body and the ground wet.

    3. When shutting down the engine by pressing the valve, make sure the handbrake is applied and the forklift is in a safe parking state.

    4. If you are not familiar with the operation of a forklift, please consult a professional or follow the guidance of the forklift instruction manual.

    5. When using the method of unplugging the relay to turn off the flame, be sure to follow the operating instructions to avoid damage to the electrical equipment.

Through the introduction of this article, I believe that everyone has understood the various methods and precautions for stalling the forklift. In daily use, we must master these skills to ensure our safety and the normal use of the forklift.