Precautions for operating electric forklifts (Ⅲ)

Work after parking

1. After using the forklift, clean the entire vehicle and choose a suitable place to park it. Pay attention to antifreeze, sun protection, and rain protection.

2. Clean and check the battery. Add distilled water, check and adjust the electrolyte density; check the battery voltage. When the battery voltage is less than the minimum limit 

voltage, charge it immediately.

3. Check whether there is leakage in the hydraulic system's oil pipes, joints, hydraulic cylinders, distribution valves, oil tanks, etc.

4. When the driver parks, he should turn off the electric lock, pull down the emergency switch, set the reversing switch and light switch to 0, put the fork on the ground, retract 

the piston rods of each hydraulic cylinder into the cylinder, and pull up the parking brake lever.

5. Eliminate other faults and keep the forklift in good technical condition.